The H.R. Kirkland Company, Inc.
4935 Allison Street, Unit 13
Arvada, Colorado 80002

Phone: 303-422-6670
Toll Free: 800-247-2303
Fax: 303-420-1856

Email:
Sales
Information
CAD
Engineering

Graphic Annunciators

Typical Part Number:

Other Information Required

  • Backbox Mounting
  • Surface or Semi-flush mount

  • Graphic Annunciator Wiring
    Wiring:

    Hardwired – Please provide voltage and feed.
    Drivers – Please provide model number of FACP and driver model number

  • Options:

    Lamptest – Pushbutton or Key Switch
    Common Trouble – Trouble circuit to include LED, buzzer, and silence switch.
    Audible Alert – Buzzer circuit to operate from alarm inputs with common
    silence switch.
    Please advise if:
    • Software Driven
    • Hardwired
    • Hardwired with subsequent alert
    Miscellaneous Switches - Switches for customers use.  Explain or provide schematic.
    Stainless Steel Doors
    Power on LED
    Dry Erase Coating - GP4 ONLY
    Cut out for customer-supplied LCD - GP4 ONLY

Graphic Face Method

GRAPHIC METHOD GP-3

  • Display is a full color electronically printed lexan insert, sandwiched between a clear protective pane and a white aluminum backing.
  • The GP3 display is intended for Leds only, with Switches mounted in the trim of the door.
  • Available in full color at no additional charge.

GRAPHIC METHOD GP-4

  • Display is a full color electronically printed lamination designed for Leds, Switches and/or customer supplied LCD.
  • Lamination consists of a velvet textured polycarbonate face, a reverse printed image and a 1/8” aluminum backing. The display is printed with pigmented inks, for long life, on UL94VO flame retardant grade lexan. A dry erase coating is available.
  • Leds and Switches mount through holes in the display. Dead Front (DF) display is available, thereby making the Leds tamperproof.
  • Ideal for Control Panels (FSCS), as Switches are mounted in the display.
  • Rigidity of the panel allows its use on display in a range of 1-15 square feet.
  • Available in full color at no additional charge.

GRAPHIC METHOD GP-5

  • Display is a full color electronically printed lamination designed for areas to be backlighted. Lamination consists of a velvet textured polycarbonate face, followed by a full color image and a 1/8” aluminum backing.
  • Backlighted partitioned areas (min. size 5/8” x 5/8”), max. size 30 square inches.
  • Requires approximately one (1) watt per square inch.
  • No switches in the display area.
  • Tamperproof
  • Available in full color at no additional charge.

GRAPHIC METHOD GP-6

  • Display is a black screened image on clear anodized brushed aluminum or stainless steel.
  • Leds mount through holes in the display.
  • This method can be used with interior and exterior graphics.
  • A clear front pane renders the Leds and display tamperproof.
  • Not recommended with switches in the display unless the clear front pane is omitted.
  • Additional charge for colors.